How to Install Refrigerator Plastic Water Line Connectors: A Step-by-Step Guide
Installing a refrigerator plastic water line connector is a simple and straightforward process. Here’s a step-by-step guide to help you get it done quickly and easily.
1. Start by turning off the water supply to the refrigerator. This is usually done by turning off the shutoff valve located behind the refrigerator.
2. Next, disconnect the existing water line from the refrigerator. This is usually done by unscrewing the nut that holds the line in place.
| Model | Tube(a) | Stem(b) |
|---|---|---|
| 1801-A | 1/4 | 1/4 |
| 1801-C | 1/4 | 3/25 |
3. Now, take the new plastic water line connector and attach it to the refrigerator. Make sure the connection is secure and there are no leaks.
4. Once the connector is in place, attach the other end of the water line to the shutoff valve. Again, make sure the connection is secure and there are no leaks.
5. Finally, turn the water supply back on and check for any leaks. If everything looks good, you’re all set!
That’s all there is to it! Installing a refrigerator plastic water line connector is a simple and straightforward process. With this step-by-step guide, you can get it done quickly and easily.
