No products were found matching your selection.

Other Related Products

  • FL-9900 High Precision Type Runner Flow ControllerFL-9900 High Precision Type Runner Flow Controller

    FL-9900 High Precision Type Runner Flow Controller

    FL-9900 flow transmitter adopts all-digital circuit design, which has the characteristics of simple circuit structure, high precision, good reproducibility, strong anti-interference ability, high protection level, easy installation and use. Widely used in water treatment, cooling water, chemical, biopharmaceutical, power plants, cement plants, sewage treatment, colleges and universities, research institutes and other industrial processes real-time, on-line monitoring of fluids。

  • Fleck 2750 Control Valve For Water PurificationFleck 2750 Control Valve For Water Purification

    FLECK Control Valve 2750

    Suitable for large residential/light commercial applications
    Fully adjustable, 5-cycle control delivers controlled upflow backwash, downflow brining and slow rinse, rapid rinse, timed brine refill and downflow service
    Backwash capacity handles tanks up to 24″ diameter
    Mechanical control (7- or 12-day clock or metered initiated regeneration)
    Valve body is solid, lead-free brass
    Time tested, hydraulically-balanced piston, seal, and spacer concept to pilot service flow and regeneration

  • CLA-7000 series Total chlorine (DPD) OnlineCLA-7000 series Total chlorine (DPD) Online

    CLA-7000 series Total chlorine (DPD) Online

    Total Chlorine (DPD) Online automatic analyzer is mainly used for real-time monitoring of water plants, secondary water supply of pipe network, medical wastewater, kidney dialysis medical water, food and beverage water, swimming pools, circulating cooling water, enterprise discharge wastewater and other occasions.

  • 2900 control valve for filters and softeners2900 control valve for filters and softeners

    FLECK Control Valve 2900

    Incorporates 2 time-tested, hydraulically-balanced pistons to independently pilot service flow and regeneration
    For use with single or multiple tank systems
    Backwashes softener tanks up to 36″ diameter
    Continuous flow rate of 106 GPM

  • FET-8920FET-8920

    FET-8920 Insert Electromagnetic Flow Meter

    Widely used for online measurement of acid&alkali in low concentrations and the low viscosity single-phase fluid of non-trade settlement process.

  • GR40 LCD softening valveGR20 control water valve

    DR Large Series Floated Bed Soften Valve

    DR20\40\50\20T\40T Soften valve series is floating bed, all appearance and geometric parameters and parts is the same as the corresponding GR20\40\50\20T\40T, floating bed has a good water quality, to adapt high hardness of the raw water, configuration swap tank should be fine and high, runing velocity in the 30-60 m/h, but resin filling rate must be above 90%, being stable working pressure,The floating bed is not suitable for frequent starting and changing water consumption.

  • CCT-8301A Conductivity Resistivity Online ControllerCCT-8301A Conductivity Resistivity Online Controller

    CCT-8301A Conductivity/Resistivity Online Controller

    Widely used for electric power,electronics,metallurgy,petrochemical,pharmaceutical ,food and  beverage,environmental protection field.

  • GR40 LED water softener valveGR40 LED water softener valve1

    GR Large Series Fixed Bed Softening Valve

    GR20\40\50\20T\40T series up flow regeneration fixed bed large valve series, water production range is 15T/ h-70t /h, the inlet flow meter is used to set the cycle of water production, slow backwash water and wash water, and the brine flow meter and the brine electric valve are used to specifically measure brine absorption and salt tank water supply.In the flow mode, the internal flow transducer realizes the switch of all stations as long as the amount of brine,the amount of slow washing water and the amount of washing water is set according to the volume (liter) of the swap tank. After the period of softening water amount (ton) is set according to the hardness of the raw water, each station decreases to “0” according to the set value, and stops decreasing and maintains when the water is out of service or no water.

  • GL-1 Filter Control Valve

    Meter and time dual mode, the meter mode, its inflow meter achieved all station can be set according to the water volume demanded , as long as set by the swap of tank volume (L) backwash water and wash water, set cycle running water volume(ton), according to the set value for each station after descending to the switch when the “0”, discontinued or no water stop decreasing and maintain. This series of products have beautiful appearance, high material precision of valve body parts, good strength and high temperature resistance, and the main valve body is connected with metal inserts with good maintainability.