Common Issues with Autotrol 255 Water Softener Systems and How to Troubleshoot Them
The Autotrol 255 water softener system is a popular choice for homeowners looking to improve the quality of their water. However, like any appliance, it can experience issues from time to time. In this article, we will discuss some common problems that may arise with the Autotrol 255 system and provide troubleshooting tips to help you resolve them.
One of the most common issues with the Autotrol 255 water softener system is a lack of soft water. If you notice that your water is not as soft as it should be, the first thing to check is the salt level in the brine tank. Make sure that there is enough salt in the tank to properly regenerate the resin beads in the system. If the salt level is low, simply add more salt to the tank and run a manual regeneration cycle to see if that resolves the issue.
Another common issue with the Autotrol 255 system is a salt bridge forming in the brine tank. A salt bridge occurs when a hard crust forms on top of the salt in the tank, preventing the salt from properly dissolving and regenerating the resin beads. To fix this issue, use a broom handle or other long object to carefully break up the salt bridge and allow the salt to flow freely in the tank.
If you are experiencing low water pressure or flow from your Autotrol 255 system, there may be a clog in the system’s control valve. To troubleshoot this issue, first check the inlet and outlet screens on the control valve for any debris or buildup. If you find any clogs, carefully clean them out using a soft brush or cloth. You may also need to check the system’s bypass valve to ensure that it is fully open and allowing water to flow through the system properly.
| Category | Type | Model | Inlet/Outlet | Drain | Base | Riser Pipe | Brine Line Connector | Water Capacity m3/h |
| automatic softener valve | Downflow & Upflow Type | ASDU2 | 1/2″, 3/4″, 1″ | 1/2″ | 2.5″ | 1.05″ OD | 3/8″ | 2 |
| ASDU2-H | 3/4″, 1″ | 1/2″ | 2.5″ | 1.05″ OD | 3/8″ | 2 | ||
| ASDU4 | 1/2″, 3/4″, 1″ | 1/2″ | 2.5″ | 1.05″ OD | 3/8″ | 4 | ||
| ASDU4-L | 1/2″, 3/4″, 1″ | 1/2″ | 2.5″ | 1.05″ OD | 3/8″ | 4 |
Another common issue with the Autotrol 255 system is a leaking brine tank. If you notice water leaking from the brine tank, the first thing to check is the tank’s float assembly. Make sure that the float is not stuck in the up position, as this can cause the tank to overflow and leak. If the float is functioning properly, check the tank’s gasket and seals for any signs of wear or damage. If you find any issues with the gasket or seals, they may need to be replaced to prevent further leaking.
If you are still experiencing issues with your Autotrol 255 water softener system after troubleshooting these common problems, it may be time to contact a professional for assistance. A trained technician will be able to diagnose the issue and recommend the best course of action to repair your system and restore it to proper working order.
In conclusion, the Autotrol 255 water softener system is a reliable appliance that can provide you with high-quality, soft water for years to come. By being aware of common issues that may arise with the system and knowing how to troubleshoot them, you can ensure that your water softener continues to operate efficiently and effectively. If you encounter any problems with your Autotrol 255 system, don’t hesitate to take action and address the issue promptly to prevent further damage and ensure the longevity of your appliance.
