Understanding the Features and Functions of the Aster conductivity meter CT-650: A Comprehensive Manual Guide
The Aster Conductivity Meter CT-650 is a sophisticated piece of equipment designed to measure the electrical conductivity of various substances. This device is widely used in laboratories, research facilities, and industries that require precise and accurate conductivity measurements. The CT-650 is renowned for its high precision, reliability, and ease of use. However, to fully harness its capabilities, one must understand its features and functions thoroughly. This article aims to provide a comprehensive manual guide to the Aster Conductivity Meter CT-650.
The CT-650 is a digital conductivity meter that uses a four-ring probe to measure conductivity. This advanced probe design eliminates polarization, ensuring accurate readings even at high conductivity levels. The device is equipped with a large, easy-to-read LCD screen that displays the conductivity reading, temperature, and other relevant information. The meter also features automatic temperature compensation, which adjusts the reading based on the temperature of the substance being measured. This feature ensures accurate readings regardless of environmental conditions.
One of the most notable features of the CT-650 is its wide measurement range. The device can measure conductivity from 0.00 μS/cm to 200 mS/cm, making it suitable for a broad range of applications. Additionally, the meter has a high resolution of 0.01 μS/cm, ensuring precise measurements. The CT-650 also features a hold function, which allows the user to freeze the display to record a reading.
| Model | DO-810/1800 dissolved oxygen meter |
| Range | 0-20.00 mg/L |
| Accuracy | ±0.5% FS |
| Temp. Comp. | 0-60℃ |
| Oper. Temp. | 0～60℃ |
| Sensor | dissolved oxygen sensor |
| Display | Segment code operation/128*64 LCD Screen(DO-1800) |
| Communication | Optional RS485 |
| Output | 4-20mA output High/Low limit double relay control |
| Power | AC 220V±10% 50/60Hz or AC 110V±10% 50/60Hz or DC24V/0.5A |
| Working Environment | Ambient temperature:0～50℃ |
| Relative humidity≤85% | |
| Dimensions | 96×96×100mm(H×W×L) |
| Hole Size | 92×92mm(H×W) |
| Installation Mode | Embedded |
The CT-650 is not just a conductivity meter; it also functions as a temperature meter. The device can measure temperatures from -10°C to 110°C with a resolution of 0.1°C. This dual functionality makes the CT-650 a versatile tool for various applications.
The device is also designed for ease of use. It features a simple, intuitive interface with clearly labeled buttons for easy operation. The meter is powered by a rechargeable battery, allowing for portable use. It also comes with a stand for benchtop use, making it suitable for both field and laboratory applications.
The CT-650 also features a data storage function, which can store up to 500 readings. This feature allows users to record and review data over time, making it easier to track changes and trends. The stored data can be easily transferred to a computer via a USB port for further analysis.
In terms of maintenance, the CT-650 is designed for easy cleaning and calibration. The four-ring probe can be easily removed and cleaned to ensure accurate readings. The device also features a calibration function, which allows users to calibrate the meter using standard solutions to ensure accurate readings.
| ROS-8600 RO Program Control HMI Platform | ||
| Model | ROS-8600 Single Stage | ROS-8600 Double Stage |
| Measuring range | Source water0~2000uS/cm | Source water0~2000uS/cm |
| First level effluent 0~200uS/cm | First level effluent 0~200uS/cm | |
| secondary effluent 0~20uS/cm | secondary effluent 0~20uS/cm | |
| Pressure sensor(optional) | Membrane pre/post pressure | Primary/ secondary membrane front/rear pressure |
| ph sensor(optional) | —- | 0~14.00pH |
| Signal collection | 1.Raw water low pressure | 1.Raw water low pressure |
| 2.Primary booster pump inlet low pressure | 2.Primary booster pump inlet low pressure | |
| 3.Primary booster pump outlet high pressure | 3.Primary booster pump outlet high pressure | |
| 4.High liquid level of Level 1 tank | 4.High liquid level of Level 1 tank | |
| 5.Low liquid level of Level 1 tank | 5.Low liquid level of Level 1 tank | |
| 6.Preprocessing signal | 6.2nd booster pump outlet high pressure | |
| 7.Input standby ports x2 | 7.High liquid level of Level 2 tank | |
| 8.Low liquid level of Level 2 tank | ||
| 9.Preprocessing signal | ||
| 10.Input standby ports x2 | ||
| Output control | 1.Water inlet valve | 1.Water inlet valve |
| 2.Source water pump | 2.Source water pump | |
| 3.Primary booster pump | 3.Primary booster pump | |
| 4.Primary flush valve | 4.Primary flush valve | |
| 5.Primary dosing pump | 5.Primary dosing pump | |
| 6.Primary water over standard discharge valve | 6.Primary water over standard discharge valve | |
| 7.Alarm output node | 7.Secondary booster pump | |
| 8.Manual standby pump | 8.Secondary flush valve | |
| 9.Secondary dosing pump | 9.Secondary dosing pump | |
| Output standby port x2 | 10.Secondary water over standard discharge valve | |
| 11.Alarm output node | ||
| 12.Manual standby pump | ||
| Output standby port x2 | ||
| The main function | 1.Correction of electrode constant | 1.Correction of electrode constant |
| 2.Overrun alarm setting | 2.Overrun alarm setting | |
| 3.All working mode time can be set | 3.All working mode time can be set | |
| 4.High and low pressure flushing mode setting | 4.High and low pressure flushing mode setting | |
| 5.The low pressure pump is opened when preprocessing | 5.The low pressure pump is opened when preprocessing | |
| 6.Manual/automatic can be chosen when boot up | 6.Manual/automatic can be chosen when boot up | |
| 7.Manual debugging mode | 7.Manual debugging mode | |
| 8.Alarm if communication interruption | 8.Alarm if communication interruption | |
| 9. Urging payment settings | 9. Urging payment settings | |
| 10. Company name,website can be customized | 10. Company name,website can be customized | |
| Power supply | DC24V±10% | DC24V±10% |
| Expansion interface | 1.Reserved relay output | 1.Reserved relay output |
| 2.RS485 communication | 2.RS485 communication | |
| 3.Reserved IO port, analog module | 3.Reserved IO port, analog module | |
| 4.Mobile/computer/touch screen synchronous display | 4.Mobile/computer/touch screen synchronous display | |
| Relative humidity | ≦85% | ≤85% |
| Environment temperature | 0~50℃ | 0~50℃ |
| Touch screen size | 163x226x80mm (H x W x D) | 163x226x80mm (H x W x D) |
| Hole Size | 7 inch:215*152mm(wide*high) | 215*152mm(wide*high) |
| Controller size | 180*99(long*wide) | 180*99(long*wide) |
| Transmitter size | 92*125(long*wide) | 92*125(long*wide) |
| Installation method | Touch screen:panel embedded; Controller: plane fixed | Touch screen:panel embedded; Controller: plane fixed |
In conclusion, the Aster Conductivity Meter CT-650 is a versatile, reliable, and user-friendly device that offers a wide range of features and functions. Understanding these features and functions is crucial to harnessing the full potential of the device. Whether you are a researcher, a laboratory technician, or an industry professional, the CT-650 can be a valuable tool for your conductivity measurement needs.
