No products were found matching your selection.
Other Related Products
-
This series of brine valves have overcome the deficiency of the products existing in the market. It can not only protect water injection and check the air, but also can limit the extreme amount of water injection and filter the water running inside. If water injection is too fast, the liquid level inside the brine well will spill out quickly and the injection has to be shut down, which will result in the insufficiency of water inside the brine tank and have bad influence upon the outcome of recycling. This kind of brine valves depends on water pressure to work. It is reliable in working and valuable in extensive employment.
-
- On-line analysis of municipal water tank disinfection
- Chlorine supplement control of pipe secondary pressurization (no negative pressure)
-
Widely used for online measurement of acid&alkali in low concentrations and the low viscosity single-phase fluid of non-trade settlement process.
-
In-line Stem is widely used in water purifiers, business water machines, pure water machine
Easy to use with reduced installation time
Can be used on a variety of pipes including copper pipe
No tools required
Fittings are cost-effective reusable components for maximum flexibility
For warm and cold water
Corrosion-free with no scale build-up
-
1). Automatic advance water softener valve Upflow type with empty salt cabinet technology.
2). Upflow Working Position :
a). Refill before regeneration: Service->Refill the softener water->Service->Back Wash->Upflow Brine and slow rinse->Fast rinse->Service .
b). Refill after regeneration: Service->Back Wash->Upflow Brine and slow rinse->Fast rinse->Refill the softener water->Service .
3). Using ceramic moving valve disk, small rotation torque.
4). Abrasion resistance of the sealing surface, outstanding and long-lived deal.
5). It could be operated with pressure directly
-
Flexible 7 or 12 day time clock or meter initiated regeneration
Fully adjustable, 5-cycle control delivers upflow back wash, downflow brining, slow rinse, rapid rinse and down flow service
Designed for single tank or multi-tank systems, alternating or interlocking
Continuous flow rate of 250 GPM
-
In-line Stem is widely used in water purifiers, business water machines, pure water machine
Easy to use with reduced installation time
Can be used on a variety of pipes including copper pipe
No tools required
Fittings are cost-effective reusable components for maximum flexibility
For warm and cold water
Corrosion-free with no scale build-up
-
Widely used in water purifiers, business water machines, pure water machine
Easy to use with reduced installation time
Can be used on a variety of pipes including copper pipe
No tools required
Fittings are cost-effective reusable components for maximum flexibility
For warm and cold water
Corrosion-free with no scale build-up
-
Meter, time clock dual mode. In flow mode, the internal flow transmitter realizes the function of setting water volume as required. After setting regeneration water volume and cleaning water volume of exchange tank, the period of softening water amount (ton) according to the hardness of the raw water, each station decreases to “0” according to the set value, and stops decreasing and maintains when the water is out of service or no water.
