Come scegliere il kit misuratore di conduttività adatto alle vostre esigenze

I conduttimetri sono strumenti essenziali per misurare la conducibilità elettrica di una soluzione, in grado di fornire preziose informazioni sulla concentrazione di ioni presenti. Che tu sia uno scienziato, un ricercatore o un hobbista, la scelta del giusto kit di conduttimetri è fondamentale per garantire misurazioni accurate e affidabili. Con una vasta gamma di opzioni disponibili sul mercato, può essere difficile selezionare il kit migliore per le tue esigenze specifiche. In questo articolo discuteremo i fattori chiave da considerare quando si sceglie un kit misuratore di conduttività per aiutarti a prendere una decisione informata.

Una delle prime cose da considerare quando si seleziona un kit conduttimetro è il tipo di campioni che si intende analizzare. Diversi kit sono progettati per applicazioni specifiche, come l’analisi della qualità dell’acqua, della conduttività del suolo o dei processi industriali. È importante scegliere un kit adatto al tipo di campioni con cui lavorerai per garantire risultati accurati.

Un altro fattore importante da considerare è la gamma di misurazioni della conducibilità che il kit può gestire. Alcuni kit sono progettati per una gamma specifica di valori di conducibilità, mentre altri offrono una gamma più ampia di opzioni di misurazione. È importante scegliere un kit in grado di misurare con precisione la conduttività dei campioni entro l’intervallo desiderato per evitare errori o imprecisioni nei risultati.

CCT-3300
Costante	10,00 cm-1	1.000cm-1	0,100 cm-1	0,010 cm-1
Conduttività	(500\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\～20.000)	(1.0\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\～2.000)	(0.5\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\～200)	(0.05\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\～18.25)
	\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\μS/cm	\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\μS/cm	\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\μS/cm	M\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\Ω\\\\\\\\\\\\\\\ \\\\\\\\\\\\\\\·cm
TDS	(250\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\～10.000)	(0,5\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\～1.000)	(0.25\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\～100)	\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\—\\\\\\\\\\\\\\\\ \\\\\\\\\\\\\\—
	ppm	ppm	ppm
Temperatura media	(0\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\～50)\\\\\\\\\\\\\\ \\\\\\\\\\\\\\\\\\℃\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ \（Temp. Compensazione : NTC10K\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\）
Risoluzione	Conduttività: 0,01\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\μS/cm\\\\\\\\\\\ \\\\\\\\\\\\\\\\\\\\；0.01mS/cm
	TDS: 0,01 ppm
	Temp.: 0,1\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\℃
Precisione	Conduttività: 1,5% \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\（FS\\\\\\\\\\\ \\\\\\\\\\\\\\\\\\\）
	Resistività: 2,0 per cento \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\（FS\\\\\\\\\\\ \\\\\\\\\\\\\\\\\\\）
	TDS:1,5 per cento \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\（FS\\\\\\\\\\\ \\\\\\\\\\\\\\\\\\\）
	Temp:\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\±0.5\\\\\\\\\\\\ \\\\\\\\\\\\\\\\\\℃
Uscita analogica	Singolo isolato(4\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\～20)mA\\\\\\\\\\ \\\\\\\\\\\\\\\\\\\\\trumento/trasmettitore per la selezione
Uscita di controllo	Relè SPDT\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\，Capacità di carico: CA 230 V/50 A (max)
Ambiente di lavoro	Temp:\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ (0\\\\\\\\\\\\ \\\\\\\\\\\\\\\\\\\～50)\\\\\\\\\\\\\\\\\\\\\\\\\\\\ \\\℃\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\；Umidità relativa\\\\\\\\\\\\ \\\\\\\\\\\\\\\\\\\\：\\\\\\\\\\\\\\\\\\\\\\\\\\\\ \\\ \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\≤85% RH (nessuna condensa)
Ambiente di archiviazione	Temp:(-20\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\～60)\\\\\\\\\\ \\\\\\\\\\\\\\\\\\\\℃; Umidità relativa\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ \\\\\\\\\\\\\\\\ \\\\\\\\\\\\\\\\≤85% RH (nessuna condensa)
Alimentazione	DC 24 V/AC 110 V/AC 220 V\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\±15 per cento \\\\\\ \\\\\\\\\\\\\\\\\\\\\\\\\（per la selezione\\\\\\\\\\\\\\\\\\\\\\\ \\\\\\\\\）
dimensione	48mm\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\×96mm\\\\\\\\\\\\\\\\ \\\\\\\\\\\\\\\\×80mm (H\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ \×W\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\×D)
Dimensione foro	44mm\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\×92mm (H\\\\\\\\\\\\\ \\\\\\\\\\\\\\\\\×W)
Installazione	Montaggio a pannello, installazione rapida

Oltre alla gamma di misurazioni, è importante considerare anche l’accuratezza e la precisione del kit conduttimetro. Cerca kit che offrano elevati livelli di accuratezza e precisione per garantire risultati affidabili e coerenti. Anche la calibrazione è un fattore importante da considerare, poiché è necessaria una calibrazione regolare per mantenere la precisione delle misurazioni nel tempo.

Trasmettitore di flusso FCT-8350
Campo di misura	Flusso istantaneo:(0~2000)m3/h;Flusso accumulato:(0~99999999)m3
Portata	(0~5)m/s
Diametro tubo applicabile	DN 25~DN 1000 per la selezione
Risoluzione	0,001 m3/ora
Intervallo di rinnovo	1S
Precisione	livello 2.0
Ripetibilità	\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\±0,5 per cento
Ingresso sonda	Gamma: 0,5 Hz~2 KHz; Alimentazione: CC 12 V (alimentazione strumento)
Uscita analogica	(4~20)mA,Strumento/trasmettitore per la selezione;
Uscita di controllo	Relè fotoelettronico a semiconduttore, corrente di carico 50 mA (max), CA/CC 30 V
Modalità di controllo	Allarme limite alto/basso flusso istantaneo, conversione della frequenza variabile del flusso
Potenza di lavoro	24 V CC
Consumo energetico:	<3.0W
Lunghezza cavo	5m di serie; o(1~500)m per la selezione
Ambiente di lavoro	Temp.:(0~50)\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\℃;umidità relativa\\\\\ \\\\\\\\\\\\\\\\\\\\\\\\\\≤85% RH (senza condensa)
Ambiente di archiviazione	Temp.:(-20~60)\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\℃; umidità relativa:\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\≤85% RH (senza condensa)
Livello di protezione	IP65(con coperchio posteriore)
dimensione	96 mm\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\×96 mm\\\\\\\\\\\\\ \\\\\\\\\\\\\\\\\\×94mm (H\\\\\\\\\\\\\\\\\\\\\\\\\\\\ \\\×W\\\\\\\\\\\\\\\\\\\\\\\\\\\\\×D)
Dimensione del foro	91mm\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\×91mm(H\\\\\\\\\\\\\ \\\\\\\\\\\\\\\\\×W)
Installazione	Montaggio a pannello, installazione rapida

Anche la facilità d’uso e la portabilità del kit conduttimetro sono considerazioni importanti. Cerca kit intuitivi e facili da usare, con istruzioni chiare e controlli intuitivi. La portabilità è particolarmente importante se utilizzerai il kit sul campo o in luoghi remoti, quindi scegli un kit leggero e facile da trasportare.

Durata e affidabilità sono anche fattori chiave da considerare quando si sceglie un kit misuratore di conduttività. Cerca kit realizzati con materiali di alta qualità e costruiti per durare. Un kit durevole resisterà all’uso regolare e fornirà misurazioni accurate per un lungo periodo di tempo. È anche importante scegliere un kit di un produttore rispettabile con un’esperienza comprovata nella produzione di prodotti affidabili e di alta qualità.

Infine, considera le funzionalità aggiuntive e gli accessori forniti con il kit del conduttimetro. Alcuni kit possono includere funzionalità come la registrazione dei dati, la compensazione automatica della temperatura o opzioni di connettività per il trasferimento dei dati. Queste funzionalità aggiuntive possono migliorare la funzionalità del kit e renderlo più versatile per un’ampia gamma di applicazioni.

In conclusione, la scelta del giusto kit conduttimetro è fondamentale per ottenere misurazioni precise e affidabili. Quando si seleziona un kit, considerare fattori quali il tipo di campioni, la gamma di misurazioni, l’accuratezza e la precisione, la facilità d’uso, la portabilità, la durata e le funzionalità aggiuntive. Tenendo conto di questi fattori, puoi scegliere un kit conduttimetro che soddisfi le tue esigenze specifiche e fornisca risultati accurati per le tue applicazioni.