Understanding the Different Controls on Fleck Water Softeners
Fleck water softeners are known for their high-quality performance and reliability in providing softened water for households and businesses. One key feature that sets Fleck water softeners apart is their advanced control systems, which allow users to customize and optimize the softening process to meet their specific needs. Understanding the different controls on Fleck water softeners is essential for maximizing the efficiency and effectiveness of these systems.
One of the most important controls on a Fleck water softener is the regeneration cycle control. This control allows users to set the frequency and duration of the regeneration cycle, which is the process by which the resin bed in the softener is cleaned and recharged with sodium ions. By adjusting the regeneration cycle control, users can ensure that their water softener is operating at peak efficiency and that their water is consistently softened to the desired level.
Another key control on Fleck water softeners is the hardness level control. This control allows users to set the hardness level of their water, which determines how much sodium ions are needed to effectively soften the water. By accurately setting the hardness level control, users can ensure that their water softener is using the right amount of salt and operating at maximum efficiency.
In addition to the regeneration cycle control and hardness level control, Fleck water softeners also feature controls for backwash and brine refill. The backwash control allows users to set the frequency and duration of the backwash cycle, which is the process by which the resin bed is flushed with water to remove any accumulated debris. The brine refill control allows users to set the amount of salt that is added to the brine tank during the regeneration cycle, ensuring that the resin bed is properly recharged with sodium ions.
| Model:\\u00a0Automatic\\u00a0Softener\\u00a0Valve | ASE2 -LCD/LED\\u00a0\\u00a0 \\u00a0 \\u00a0 \\u00a0 | |
| Refilling type | \\u00a0\\u00a0\\u00a0\\u00a0refill before regeneration\\u00a0\\u00a0 | refill after regeneration |
| Working Position\\u00a0 | Service->Refill the softener water->Service->Back Wash->Upflow Brine and slow rinse->Fast rinse->Service | Service->Back Wash->Upflow Brine and slow rinse-> Fast rinse-> Refill the softener\\u00a0\\u00a0water->Service |
| \\u3000 | Automatic type\\u00a0 | Automatic type\\u00a0 |
| \\u3000 | Meter Delay\\u00a0 | Meter Delay\\u00a0 |
| Regeneration mode | Intelligent Meter Delay | Meter immediate |
| \\u3000 | Timer by day : \\u00a00-99\\u00a0days\\u00a0 | Intelligent Meter Delay |
| \\u3000 | Timer by hours: 0-99 hours\\u00a0 | Intelligent Meter Immediate |
| \\u3000 | \\u3000 | Timer by day : \\u00a00-99\\u00a0days\\u00a0 |
| \\u3000 | \\u3000 | Timer by hours: 0-99 hours |
| Inlet | 1/2” \\u00a03/4” \\u00a01”\\u00a0 | |
| Outlet | 1/2” \\u00a03/4” \\u00a01”\\u00a0 | |
| Drain | 1/2” \\u00a0 | |
| Base | 2-1/2” | |
| Riser pipe | 1.05” OD | |
| Water Capacity | 2m3/h | |
| Working Pressure | 0.15-0.6Mpa | |
| Working Temperature | 5-50\\u00b0C | |
| Power Supply | AC100-240 / 50-60Hz \\u00a0 \\u00a0 / \\u00a0 \\u00a0 \\u00a0 DC12V-1.5A \\u00a0 | |
In conclusion, Fleck water softeners are renowned for their advanced control systems, which allow users to customize and optimize the softening process to meet their specific needs. By understanding the different controls on Fleck water softeners, users can ensure that their water softener is operating at peak efficiency and providing them with the highest quality softened water. Whether adjusting the regeneration cycle control, hardness level control, backwash control, or brine refill control, users can rest assured that their Fleck water softener is working tirelessly to provide them with the best possible water quality.
