No products were found matching your selection.

Other Related Products

  • Multi Parameter Online Water Quality Residual Chlorine AnalyzerMulti Parameter Online Water Quality Residual Chlorine Analyzer

    POP-8300 Free Chlorine online controller

    • On-line analysis of municipal water tank disinfection
    • Chlorine supplement control of pipe secondary pressurization (no negative pressure)
  • GR40 LED water softener valveGR40 LED water softener valve1

    GR Large Series Fixed Bed Softening Valve

    GR20\40\50\20T\40T series up flow regeneration fixed bed large valve series, water production range is 15T/ h-70t /h, the inlet flow meter is used to set the cycle of water production, slow backwash water and wash water, and the brine flow meter and the brine electric valve are used to specifically measure brine absorption and salt tank water supply.In the flow mode, the internal flow transducer realizes the switch of all stations as long as the amount of brine,the amount of slow washing water and the amount of washing water is set according to the volume (liter) of the swap tank. After the period of softening water amount (ton) is set according to the hardness of the raw water, each station decreases to “0” according to the set value, and stops decreasing and maintains when the water is out of service or no water.

  • Brine Valves

    Brine Valve

    This series of brine valves have overcome the deficiency of the products existing in the market. It can not only protect water injection and check the air, but also can limit the extreme amount of water injection and filter the water running inside. If water injection is too fast, the liquid level inside the brine well will spill out quickly and the injection has to be shut down, which will result in the insufficiency of water inside the brine tank and have bad influence upon the outcome of recycling. This kind of brine valves depends on water pressure to work. It is reliable in working and valuable in extensive employment.

  • IoT instrument MFC-8800IoT instrument MFC-8800

    ROC IoT instrument MFC-8800 Internet of Things instrument for water quality monitoring

    For complex industrial processes, sewage treatment, water reuse, environmental monitoring, industrial field control, chemical process, thermal detection and discrete control, data transmission control and remote data transmission.

  • 2850 control valve for filters and softeners 32850 control valve for filters and softeners 3

    FLECK Control Valve 2850

    Time-tested hydraulically balanced piston, seal and spacer design to pilot service flow and regeneration
    Solid, lead-free brass valve body for superior strength and durability
    Backwash capacity handles tanks up to 30″ diameter
    1-1/2″ top mount control valve ideal for smaller size commercial/industrial applications
    Consistent brining regardless of salt levels with timed brine refills
    Choice of 7 or 12 day clock, manual or meter
    Continuous flow rate of 51 GPM with a backwash of 49 GPM

  • Single stage ,double stage Reverse osmosis program controller

    ROC-7000 Reverse Osmosis Ultra filtration controller

    Applicable to all kinds of small and medium-sized single-stage, double-stage reverse osmosis control system. With simple operation, complete measurement and configuration, highly integrated system

  • SD Serials Manual Filter Control Valve

    SD Serials Manual Filter Control Valve

    “One Dynamic and Two Static” Double Static Ceramics Plates Multi-port Valve is on behalf of another beginning in the field of water treatment control, which can overcome many disadvantages of traditional products in installation.

  • 9500 waterproof conductivity meter9500 waterproof conductivity meter

    PH/ORP-9500 Water Quality Monitor PH/ORP Controller

    On-line analysis and process control of the oil refining, metallurgy,chemical synthesis industry process;

  • GR2-1 water softening valveGR2-1 water softening valve

    GR-1 Fixed Bed Softening Valve

    Meter, time clock dual mode. In flow mode, the internal flow transmitter realizes the function of setting water volume as required. After setting regeneration water volume and cleaning water volume of exchange tank, the period of softening water amount (ton) according to the hardness of the raw water, each station decreases to “0” according to the set value, and stops decreasing and maintains when the water is out of service or no water.