Troubleshooting Common Issues with Autotrol 268 760 Manual

The Autotrol 268 760 manual is a valuable resource for anyone who owns or operates an autotrol water softener system. This manual provides detailed instructions on how to properly install, operate, and maintain the Autotrol 268 760 system. However, like any piece of equipment, issues can arise that may require troubleshooting. In this article, we will discuss some common issues that may occur with the Autotrol 268 760 system and provide solutions to help you resolve them.

One common issue that users may encounter with the Autotrol 268 760 system is a loss of water pressure. If you notice a decrease in water pressure coming from your faucets or showerheads, there are a few potential causes to consider. First, check the water softener system to ensure that it is properly connected to the water supply and that the valves are open. If everything appears to be in order, the issue may be related to a clogged filter or resin bed. In this case, you will need to clean or replace the filter and resin bed to restore water pressure.

Another common issue with the Autotrol 268 760 system is a salt bridge forming in the brine tank. A salt bridge occurs when a hard crust forms on top of the salt in the brine tank, preventing the salt from properly dissolving and regenerating the resin bed. To resolve this issue, you will need to carefully break up the salt bridge using a broom handle or other long tool. Once the salt bridge has been broken up, you can add fresh salt to the brine tank to ensure proper regeneration of the resin bed.

If you notice that your water softener system is not using salt as quickly as it should, this may indicate a problem with the brine tank float assembly. The float assembly is responsible for regulating the amount of water in the brine tank and ensuring that the salt is properly dissolved. If the float assembly is not functioning correctly, it may need to be adjusted or replaced to ensure proper salt usage.

In some cases, users may experience a leak in the Autotrol 268 760 system. Leaks can occur for a variety of reasons, including loose fittings, damaged seals, or cracked pipes. If you notice a leak in your water softener system, it is important to address it promptly to prevent water damage and ensure the continued operation of the system. Check all fittings and seals for tightness and replace any damaged components as needed to stop the leak.

Overall, the Autotrol 268 760 manual is an invaluable resource for troubleshooting common issues with the Autotrol water softener system. By following the instructions provided in the manual and taking proactive steps to maintain your system, you can ensure that your water softener operates efficiently and effectively for years to come. If you encounter any issues that you are unable to resolve on your own, don’t hesitate to contact a professional for assistance. By addressing issues promptly and effectively, you can enjoy the benefits of soft, clean water in your home for years to come.

Step-by-Step Guide to Programming Autotrol 268 760 Manual

The Autotrol 268 760 manual is a valuable resource for anyone looking to program their Autotrol water softener system. This step-by-step guide will walk you through the process of programming your Autotrol 268 760 system, ensuring that you get the most out of your water softener.

To begin programming your Autotrol 268 760 system, you will first need to locate the control panel. This is typically located on the front of the water softener unit and is where you will input all of your programming settings. Once you have located the control panel, you can begin the programming process.

The first step in programming your Autotrol 268 760 system is to set the current time and date. This is important for ensuring that your system operates efficiently and effectively. To set the time and date, simply press the “Set Time/Date” button on the control panel and use the arrow keys to adjust the settings. Once you have set the time and date, press the “Enter” button to save your changes.

Next, you will need to set the regeneration time for your Autotrol 268 760 system. Regeneration is the process by which the system cleans and recharges the resin beads in the water softener, ensuring that it continues to operate at peak efficiency. To set the regeneration time, press the “Set Regeneration Time” button on the control panel and use the arrow keys to adjust the settings. Once you have set the regeneration time, press the “Enter” button to save your changes.

Model: Manual Filter Valve	MF2	MF2-H	MF4	MF4-B	MF10
Working Position	Filter -> Back wash -> Fast rinse ->Filter
Regeneration mode	Manual
Inlet	3/4”	3/4”	1”	1”	2”
Outlet	3/4”	3/4”	1”	1”	2”
Drain	3/4”	3/4”	1”	1”	2”
Base	2-1/2”	2-1/2”	2-1/2”	2-1/2”	4”
Riser pipe	1.05” OD	1.05” OD	1.05” OD	1.05” OD	1.5”D-GB
Water Capacity	2m3/h	2m3/h	4m3/h	4m3/h	10m3/h
Working Pressure	0.15-0.6Mpa
Working Temperature	5-50 °C
Power Supply	No need Power

After setting the regeneration time, you will need to program the hardness level of your water. This is important for ensuring that your water softener system effectively removes minerals from your water. To program the hardness level, press the “Set Hardness Level” button on the control panel and use the arrow keys to adjust the settings. Once you have set the hardness level, press the “Enter” button to save your changes.

Once you have programmed the time and date, regeneration time, and hardness level, you can now set any additional settings for your Autotrol 268 760 system. This may include setting the backwash time, adjusting the salt dosage, or programming any additional features that your system may have. To access these settings, simply navigate through the menu on the control panel using the arrow keys and adjust the settings as needed.

Finally, once you have programmed all of the settings for your Autotrol 268 760 system, you can save your changes by pressing the “Save” button on the control panel. This will ensure that your settings are stored and will remain in place even if the power is lost.

In conclusion, programming your Autotrol 268 760 system is a simple and straightforward process that can be completed in just a few easy steps. By following this step-by-step guide, you can ensure that your water softener system operates efficiently and effectively, providing you with high-quality, softened water for years to come.